Part 1. Ellipse Engraving
160 mm × 120 mm
Laser Type: 450 nm Blue Laser
Material: Cork Coaster
Mode: Gcode
Settings: Power: 100%, Depth: 70%, Pass: 1
160 mm × 120 mm
Laser Type: 1064 nm Infrared Laser
Material: Coated Metal
Mode: Gcode
Settings: Power: 100%, Depth: 80%, Pass: 1
Part 2. Engraving with Rotary Extension
160 mm × 402 mm (perimeter)
Laser Type: 1064 nm Infrared Laser
Material: Coated Metal
Mode: Dithering
Settings: Power: 30%, Depth: 30%, Pass: 1
Part 3. Engraving with Slide Extension
160 mm × 300 mm
Laser Type: 1064 nm Infrared Laser
Material: Coated Metal
Mode: Dithering
Settings: Power: 40%, Depth: 20%, Pass: 1
The following video will directly show three distinct scenarios regarding the engraving areas. If you have further questions or suggestions regarding the LP4's engraving area, please feel free to comment below.
Comments